Bighorn Creek has a wide range of rich multi-colored hues of rust, bronze and copper created from the stone’s iron content. Its core is a blue gray.
Bighorn Creek products should not be installed on or near a water feature or pool. Bighorn Creek products contain a certain amount of iron, thus bleeding may occur. Bighorn Creek products must be cleaned with a cement or stone cleaner and allowed to dry completely. Masons must be very careful not to mix too much lime or calcium in their mortar mix to avoid “bleeding”. Masons should seal Bighorn Creek after it is set in mortar. Glacier Stone, LLC is not responsible for improper installation that results in “bleeding”. There is NO WARRANTY against this stone “bleeding” by Glacier Stone Supply, LLC.
Design tip: An effective design technique is to utilize our larger specifications in combination with our standard sized ledge and random specifications in a ratio of 70-30% . Square and Rec as well as Big Face Random piece are known as “jumpers” and create movement as our eyes are drawn to these special pieces and naturally move across the wall.
SQUARE & RECS
Roughly parallel tops and bottoms. Our largest specification of “ledge”.
Height: 7” to 14”+ x Length: 10” to 24”+
Roughly parallel tops and bottoms with natural or snapped edges.
Height: 2” to 7” x Length: 6” to 16”+
955 Whitefish Stage Road
Kalispell, MT 59901